Join
Search

Fission Stories #103: Nuclear Time Out

Bookmark and Share

My two nephews are generally good boys, but every now and then their behavior compels my sister-in-law and brother to give them a time-out. The time-outs seem to be effective – if nothing else, it curbs the behavior problems during the time-outs themselves.

A recent nuclear time-out, however, showed this behavior control practice can have its downsides.On October 23, 2010, workers at the Palisades nuclear plant in Michigan prepared to restart the reactor following a refueling outage. An operator in the control room, licensed by the Nuclear Regulatory Commission, implemented a procedure developed during the last refueling outage to deliberately lower the water level above the reactor core to remove air and other non-condensible gases from the reactor vessel and its attached piping. Another NRC-licensed operator in the control room worked to resolve a problem with the turbine control system.

Over the next few hours, these operators faced a series of unexpected problems performing their assigned duties – which was not surprising because restarting reactors after weeks of downtime with extensive maintenance activities always involves a number of issues to be resolved. One operator had those annoyances compounded by frustration with the actions of the second operator.

The operator’s fun-meter went downscale when he was updating the computer-based log book to reflect tasks he had completed. The second operator got onto the same computer and closed out the first operator’s log book. The first operator protested, saying he was using the computer. The second operator ignored him and continued using the computer. The first operator lost his temper and told his colleague that if he insisted on using the computer, he could do the first operator’s job as well. The first operator turned and headed for the door. The control room supervisor called out for the operator to wait. But the operator felt he was too angry to stick around and left the control room to recover his cool in a break room across the hall. He returned to the control room about 10 minutes later and resumed his duties.

The remainder of that shift passed without incident. That operator, his colleague, the control room supervisor, and the rest of the operating crew returned the following night for another shift. It passed without incident.

But word of the incident found its way to both the plant’s upper management and the NRC. When the operator arrived at Palisades for work two nights later, he was met at the gate by the Operations Manager and a union representative. After the operator’s oral statement was taken, the Operations Manager sent him home with instructions not to return to the plant until directed to do so. That direction came two weeks later, followed by another two weeks of the operator not being allowed inside the plant’s fences without an escort. He was disciplined with a week off without pay and subjected to a long-term remediation plan. He was not allowed inside the control room for nine months.

And the NRC weighed in, too. The operator held a license issued by the NRC. The NRC’s investigation determined he had violated the terms and conditions of that license, making it susceptible to revocation or suspension. By leaving the control room without permission and without having formally turned over his duties to another NRC-licensed operator, the operator had been inattentive to duty in the eyes of the NRC – a very serious charge. The operator’s very career was in jeopardy due to a rash decision made in a moment of anger.

The NRC gave the operator three choices: (1) he could contest the violation, (2) he could accept the violation and then whatever sanction the NRC levied, or (3) he could enter into Alternate Dispute Resolution (ADR) with the NRC. The operator chose Door #3. The ADR process yielded a mutually acceptable outcome. The operator would retain his NRC-issued license, but would have to take several steps including “nuclear community service.” The operator had to write a lengthy paper about the event, what he did wrong, and what he learned from it and submit it for for publication in the newsletter of the Professional Reactor Operators Society (PROS). The operator returned to his control room duties about a year after the incident.

The NRC’s investigation also found fault with the company. The operator had been allowed to return to work and work the following day as if the incident never happened. Only after upper management and the NRC learned about it was the incident entered into the plant’s corrective action program and the operator’s actions questioned. The NRC also sanctioned the company for its initial lax response to the incident.

Our Takeaway

In an ideal world, individuals licensed by the NRC to staff control rooms of nuclear power plants would never make mistakes, never get emotional, and never lose their tempers. In an idealer world, nuclear power plants would be inherently safe such that NRC didn’t need to license control room operators.

In the real world, control room operators are humans. They get tired. They get frustrated. They make mistakes. In other words, they act like humans.

By his own admission and confirmed by many others, the operator at Palisades made a mistake. He paid a high price for that mistake. Again and again, he has had to confess his sins and pledge reforms. Such widespread mea culpas are uncomfortable. In addition, it was not clear that the company and the NRC were going to permit him to return to his control room work. His career was at risk.

It is apparent from the operator’s mandated narrative that he has accepted full and exclusive blame for the incident. It is also clearly evident that he is as unlikely as anyone to ever again misbehave while on duty. Thus, instead being banned from the control room, he should be welcomed there. The painful experience almost certainly makes him a better operator than he had been before this incident.

This is not to say that operator performance across the country can be improved by having each one stalk out or mess up. The NRC and the Palisades’ operator went to great lengths to share the lessons from this incident so that others can benefit from it without having to replicate it. UCS encourages all nuclear plant workers – not just control room operators – to read the operator’s account. He paints a picture of the situation that would enable most readers to find themselves in his shoes, either in theory or in past practice. But he also provides a clear explanation for how he, and we, can avoid painting more pictures like it.

“Fission Stories” is a weekly feature by Dave Lochbaum. For more information on nuclear power safety, see the nuclear safety section of UCS’s website and our interactive map, the Nuclear Power Information Tracker.

Posted in: fission stories, Nuclear Power Safety Tags: ,

About the author: Mr. Lochbaum received a BS in Nuclear Engineering from the University of Tennessee in 1979 and worked as a nuclear engineer in nuclear power plants for 17 years. In 1992, he and a colleague identified a safety problem in a plant where they were working. When their concerns were ignored by the plant manager, the utility, and the Nuclear Regulatory Commission (NRC), they took the issue to Congress. The problem was eventually corrected at the original plant and at plants across the country. Lochbaum joined UCS in 1996 to work on nuclear power safety. He spent a year in 2009-10 working at the NRC Training Center in Tennessee. Areas of expertise: Nuclear power safety, nuclear technology and plant design, regulatory oversight, plant license renewal and decommissioning

Support from UCS members make work like this possible. Will you join us? Help UCS advance independent science for a healthy environment and a safer world.

Comments are closed. Comments are automatically closed after two weeks.